Distribution Box, Power Distribution Box|Tianjin PRESKIN Technology Co., Ltd.
GTXGN -12 (12kV) High Voltage Solid-insulated Switchgear RMU/Distribution Board

GTXGN -12 (12kV) High Voltage Solid-insulated Switchgear RMU/Distribution Board

    Packaging & Delivery

    Packaging DetailsWooden Case

    Delivery Time20-30 days


Share

    General

    GTXGN-12 Solid-insulated Switchgear is a new generation of fully-insulated and fully-enclosed environment-friendly switchgear. All live parts are enclosed in epoxy resin housing with APG injection moulding, and the adjacent cabinets are connected by plug-in solid-insulated bus, so the switchgear will not be affected by external environment.


    GTXGN-12 Solid-insulated Switchgear includes three cabinets of basic functional units: vacuum load switch cabinet, vacuum load switch & fuse cabinet combination, and vacuum circuit breaker cabinet, which applies to 10kV threephase AC 50Hz single-busbar system. As an equipment to receive and distribute electric energy, it is provided with line control, protection, monitoring and communication, and can be used in airport, subway, large building, secondary substation and mining or industrial enterprises, especially suitable for those occasions with narrow place, poor environment, high altitude and maintenance free requirement.


    Quality Assurance

    Quality assurance is established based on continuous improvement in the process of research, development, design and production in compliance with quality system. The manufacturing factory has passed ISO9001 certification.


    The product has been provided with type test as required by National High-voltage Test and Inspection Center, whose basic parameters and technical index conform the following standards:

    GB 1984-2014 High-voltage alternating-current circuit-breakers

    GB3804-2004 High-voltage alternating-current switches for rated voltage above 3.6 kV and less than 40.5 kV

    GB3906-2006 Alternating-current metal-enclosed switchgear and controlgear for rated voltages above 3.6 kV and up to and including 40.5 kV

    GB16926-2009 High-voltage alternating current switch-fuse combinations

    Q/GDW730-2012 Specifications for 12kV solid-insulated ring main units


    Service Environmental Conditions

    Altitude: not higher than 1000m;

    Ambient temperature: upper limit +45℃ , lower limit -40℃ ;

    Relative humidity: daily mean RH not more than 95%, monthly mean RH not more than 90%;

    No obvious pollutions such as erosion or combustible gas;

    No frequent violent vibrations, earthquake intensity not above 8-magnitude.

    Note: the customers shall consult any deviations from normal service conditions with the manufacturer.



General

GTXGN-12 Solid-insulated Switchgear is a new generation of fully-insulated and fully-enclosed environment-friendly switchgear. All live parts are enclosed in epoxy resin housing with APG injection moulding, and the adjacent cabinets are connected by plug-in solid-insulated bus, so the switchgear will not be affected by external environment.


GTXGN-12 Solid-insulated Switchgear includes three cabinets of basic functional units: vacuum load switch cabinet, vacuum load switch & fuse cabinet combination, and vacuum circuit breaker cabinet, which applies to 10kV threephase AC 50Hz single-busbar system. As an equipment to receive and distribute electric energy, it is provided with line control, protection, monitoring and communication, and can be used in airport, subway, large building, secondary substation and mining or industrial enterprises, especially suitable for those occasions with narrow place, poor environment, high altitude and maintenance free requirement.


Quality Assurance

Quality assurance is established based on continuous improvement in the process of research, development, design and production in compliance with quality system. The manufacturing factory has passed ISO9001 certification.


The product has been provided with type test as required by National High-voltage Test and Inspection Center, whose basic parameters and technical index conform the following standards:

GB 1984-2014 High-voltage alternating-current circuit-breakers

GB3804-2004 High-voltage alternating-current switches for rated voltage above 3.6 kV and less than 40.5 kV

GB3906-2006 Alternating-current metal-enclosed switchgear and controlgear for rated voltages above 3.6 kV and up to and including 40.5 kV

GB16926-2009 High-voltage alternating current switch-fuse combinations

Q/GDW730-2012 Specifications for 12kV solid-insulated ring main units


Service Environmental Conditions

Altitude: not higher than 1000m;

Ambient temperature: upper limit +45℃ , lower limit -40℃ ;

Relative humidity: daily mean RH not more than 95%, monthly mean RH not more than 90%;

No obvious pollutions such as erosion or combustible gas;

No frequent violent vibrations, earthquake intensity not above 8-magnitude.

Note: the customers shall consult any deviations from normal service conditions with the manufacturer.



Copyright © Tianjin PRESKIN Technology Co., Ltd. All Rights Reserved| Sitemap